Re: [ts-7000] Re: Problen with serial port on TS7260

[Ricardo Sifón <>]

OK. But if J2 is not enable, I can not enter to the board through any COM port. Is that correct?

Sorry if my query is a bit silly, but long ago I've been struggling with this issue.

Ricardo

2010/7/3 j.chitte <>

 

--- In ts-7000%40yahoogroups.com, "pasionportrinidad" <> wrote:
>
> I want to take a serial COM port to send and receive data with an external board.
> At the beginning of the line: "T0: 23: respawn: / sbin / getty-L ttyS0 vt100 115 200" added the symbol "#" for not using the port as a console.
> But I still can communicate with external board.
> I use the command "setserial" I can not configure the uart and the port. How should I set it up?
>
> Ricardo Sifón
>

read the TS manual for your board and look for j2 ;)

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___