[ts-7000] Re: Problen with serial port on TS7260

["j.chitte" <>]

--- In  "pasionportrinidad" <> wrote:
>
> I want to take a serial COM port to send and receive data with an external 
> board.
> At the beginning of the line: "T0: 23: respawn: / sbin / getty-L ttyS0 vt100 
> 115 200" added the symbol "#" for not using the port as a console.
> But I still can communicate with external board.
> I use the command "setserial" I can not configure the uart and the port. How 
> should I set it up?
>
> Ricardo Sifón
>

read the TS manual for your board and look for j2 ;)




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/