Re: [ts-7000] Re: Problen with serial port on TS7260

[Ricardo Sifón <>]

Angel, do not expect to read it for me. I can still read.
And as I read, I made an inquiry about the jumper 2.

I think this mailing list aims to address that together we can help so we can use our TS boards.

For those who still interested in helping, let you know that the ports AM0 probe, and TS0 AM1. And still unable to communicate external board with TS board.

Question: Are ports that come with the TS board are very different from bringing a conventional PC?

 

Best Regards

Ricardo Sifón

 

2010/7/5 j.chitte <>

 

--- In ts-7000%40yahoogroups.com, Ricardo Sifón <> wrote:
>
> OK. But if J2 is not enable, I can not enter to the board through any COM
> port. Is that correct?
> Sorry if my query is a bit silly, but long ago I've been struggling with
> this issue.
>
> Ricardo
>
>

> 2010/7/3 j.chitte <>
>
> >
> >
> >
> >
> > --- In ts-7000%40yahoogroups.com <ts-7000%40yahoogroups.com>,

> > "pasionportrinidad" <ricardosifon@> wrote:
> > >
> > > I want to take a serial COM port to send and receive data with an
> > external board.
> > > At the beginning of the line: "T0: 23: respawn: / sbin / getty-L ttyS0
> > vt100 115 200" added the symbol "#" for not using the port as a console.
> > > But I still can communicate with external board.
> > > I use the command "setserial" I can not configure the uart and the port.
> > How should I set it up?
> > >
> > > Ricardo Sifón
> > >
> >
> > read the TS manual for your board and look for j2 ;)
> >
> >
> >
>

BTW that should be jp2 .

I did not say remove jp2 , I said look for it and READ what is there.

I'm not going to cut and paste the manual text for you here, make an effort.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___