Ricardo,
Can you do what you are trying to do on a regular PC? Have you taken a
close look at the pinout for ttyAM1 on the 7260. It is not "standard"
Angel
On Fri, 2010-07-02 at 03:19 +0000, pasionportrinidad wrote:
>
> I want to take a serial COM port to send and receive data with an
> external board.
> At the beginning of the line: "T0: 23: respawn: / sbin / getty-L ttyS0
> vt100 115 200" added the symbol "#" for not using the port as a
> console.
> But I still can communicate with external board.
> I use the command "setserial" I can not configure the uart and the
> port. How should I set it up?
>
> Ricardo SifÃn
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|