--- In Ricardo Sifón <> wrote:
>
> OK. But if J2 is not enable, I can not enter to the board through any COM
> port. Is that correct?
> Sorry if my query is a bit silly, but long ago I've been struggling with
> this issue.
>
> Ricardo
>
>
> 2010/7/3 j.chitte <>
>
> >
> >
> >
> >
> > --- In <ts-7000%40yahoogroups.com>,
> > "pasionportrinidad" <ricardosifon@> wrote:
> > >
> > > I want to take a serial COM port to send and receive data with an
> > external board.
> > > At the beginning of the line: "T0: 23: respawn: / sbin / getty-L ttyS0
> > vt100 115 200" added the symbol "#" for not using the port as a console.
> > > But I still can communicate with external board.
> > > I use the command "setserial" I can not configure the uart and the port.
> > How should I set it up?
> > >
> > > Ricardo Sifón
> > >
> >
> > read the TS manual for your board and look for j2 ;)
> >
> >
> >
>
BTW that should be jp2 .
I did not say remove jp2 , I said look for it and READ what is there.
I'm not going to cut and paste the manual text for you here, make an effort.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|