Hello Everyone,
I'm considering purchasing a TS board for educational purposes to play with OS
fundamentals which would require access to the bare metal. I was wondering if
anyone out there has been able to load U-Boot or Redboot onto the 7500/7800
series, or if anyone could comment on if it is possible.
>From what I can tell from past posts this has only been tried on the 7200
>series, but the boot process seems slightly different on the newer boards. I
>assume that if I can compile a U-Boot/redboot kernel and rootfs and load it
>onto the correct SD/flash partitions it should work but I'm not sure if this
>is an oversimplification on my part.
Any guidance or recommended documentation that I should look at would be most
helpful!
Thanks,
Tai
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|