I don't think TS has the actual source code for ts11-rt on the ftp
site (I could be wrong... things change from time to time -- but at
least I did not find it up there).
What you might have downloaded was the ts11 base source.
Then you must apply the rtai patch to the ts11 code.
The ts11 source is at
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-
2.4.26-ts11-src.tar.gz
The rtai patch is at
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/rt-
tskernel-2.4.26-tsX-adeos.patch
After the patch you compile the kernel...
Then when you go to rtai it should find all the right places.
The rtai message you received seems to note that the rtai patch
wasn't applied, so perhaps you are mistaken about downloading pre-
patched source code.
I saw your other e-mail about the output of the test programs... I
will try and run something and post my outputs.
--- In "Dan" <> wrote:
>
> okay... so i'm trying to compile RTAI on my own and i'm having some
> issues. i've downloaded and unpacked the kernel source for ts11-rt
> and successfully (i think) cross-compiled it using the
> gcc-3.3.4-glibc-2.3.2 crosstool chain from the TS ftp site and the
> default ts7200 config file in linux24/arch/arm/def-configs. i did
not
> apply the adeos patch (assuming that because i downloaded the src
for
> the ts11-rt version it was not needed.
>
> next i unpacked the rtai-magma-3.2 source tarball from the TS ftp
site
> and tried to compile it using the same toolchain. i get message
> stating "configure: error: HAL patch not applied enabled
in ../linux24"
>
> what am i doing wrong?
>
> thanks,
> dan
>
> --- In "Dan" <jiggersplat@> wrote:
> >
> > i can't seem to find rtai module binaries for ts11 (only ts9).
are
> > they out there somewhere and i just can't find them?
> >
> > i'm running the ts11-rt kernel and when i try and run anything
from
> > the test suite i get an error telling me the rtai modules are
compiled
> > for ts9 and i'm running ts11.
> >
> > i'm a total linux noob and am trying to avoid compiling them
myself,
> > but if that is in fact what i need to do, anyone have a good how-
to?
> >
> > thanks,
> > dan
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|