you're right about the kernel source. i had already realized that was
not the case after i posted and tried the same procedure after
applying the adeos patch. unforutunely, i don't seem to be able to
apply the adeos patch correctly.
Hunk # FAILED at 1.
1 out of 4 hunks FAILED -- saving rejects to file Makefile.rej
--- In "Steve Janisch" <> wrote:
>
> I don't think TS has the actual source code for ts11-rt on the ftp
> site (I could be wrong... things change from time to time -- but at
> least I did not find it up there).
>
> What you might have downloaded was the ts11 base source.
>
> Then you must apply the rtai patch to the ts11 code.
>
> The ts11 source is at
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-
> 2.4.26-ts11-src.tar.gz
>
> The rtai patch is at
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/rt-
> tskernel-2.4.26-tsX-adeos.patch
>
> After the patch you compile the kernel...
>
> Then when you go to rtai it should find all the right places.
>
> The rtai message you received seems to note that the rtai patch
> wasn't applied, so perhaps you are mistaken about downloading pre-
> patched source code.
>
> I saw your other e-mail about the output of the test programs... I
> will try and run something and post my outputs.
>
>
>
> --- In "Dan" <jiggersplat@> wrote:
> >
> > okay... so i'm trying to compile RTAI on my own and i'm having some
> > issues. i've downloaded and unpacked the kernel source for ts11-rt
> > and successfully (i think) cross-compiled it using the
> > gcc-3.3.4-glibc-2.3.2 crosstool chain from the TS ftp site and the
> > default ts7200 config file in linux24/arch/arm/def-configs. i did
> not
> > apply the adeos patch (assuming that because i downloaded the src
> for
> > the ts11-rt version it was not needed.
> >
> > next i unpacked the rtai-magma-3.2 source tarball from the TS ftp
> site
> > and tried to compile it using the same toolchain. i get message
> > stating "configure: error: HAL patch not applied enabled
> in ../linux24"
> >
> > what am i doing wrong?
> >
> > thanks,
> > dan
> >
> > --- In "Dan" <jiggersplat@> wrote:
> > >
> > > i can't seem to find rtai module binaries for ts11 (only ts9).
> are
> > > they out there somewhere and i just can't find them?
> > >
> > > i'm running the ts11-rt kernel and when i try and run anything
> from
> > > the test suite i get an error telling me the rtai modules are
> compiled
> > > for ts9 and i'm running ts11.
> > >
> > > i'm a total linux noob and am trying to avoid compiling them
> myself,
> > > but if that is in fact what i need to do, anyone have a good how-
> to?
> > >
> > > thanks,
> > > dan
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|