|
You are having trouble applying the patch?? Have you tried the obvious things... -starting direct from the tar files in case something got screwed up the way you were doing it? -checking permissions (i.e. applying patch as root or with sudo) I could send you the kernel and module binaries if you want.
you're right about the kernel source. i had already realized that was not the case after i posted and tried the same procedure after applying the adeos patch. unforutunely, i don't seem to be able to apply the adeos patch correctly. Hunk # FAILED at 1. 1 out of 4 hunks FAILED -- saving rejects to file Makefile.rej --- In "Steve Janisch" <> wrote: > > I don't think TS has the actual source code for ts11-rt on the ftp > site (I could be wrong... things change from time to time -- but at > least I did not find it up there). > > What you might have downloaded was the ts11 base source. > > Then you must apply the rtai patch to the ts11 code. > > The ts11 source is at > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel- > 2.4.26-ts11-src.tar.gz > > The rtai patch is at > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/rt- > tskernel-2.4.26-tsX-adeos.patch > > After the patch you compile the kernel... > > Then when you go to rtai it should find all the right places. > > The rtai message you received seems to note that the rtai patch > wasn't applied, so perhaps you are mistaken about downloading pre- > patched source code. > > I saw your other e-mail about the output of the test programs... I > will try and run something and post my outputs. > > > > --- In "Dan" <jiggersplat@> wrote: > > > > okay... so i'm trying to compile RTAI on my own and i'm having some > > issues. i've downloaded and unpacked the kernel source for ts11-rt > > and successfully (i think) cross-compiled it using the > > gcc-3.3.4-glibc-2.3.2 crosstool chain from the TS ftp site and the > > default ts7200 config file in linux24/arch/arm/def-configs. i did > not > > apply the adeos patch (assuming that because i downloaded the src > for > > the ts11-rt version it was not needed. > > > > next i unpacked the rtai-magma-3.2 source tarball from the TS ftp > site > > and tried to compile it using the same toolchain. i get message > > stating "configure: error: HAL patch not applied enabled > in ../linux24" > > > > what am i doing wrong? > > > > thanks, > > dan > > > > --- In "Dan" <jiggersplat@> wrote: > > > > > > i can't seem to find rtai module binaries for ts11 (only ts9). > are > > > they out there somewhere and i just can't find them? > > > > > > i'm running the ts11-rt kernel and when i try and run anything > from > > > the test suite i get an error telling me the rtai modules are > compiled > > > for ts9 and i'm running ts11. > > > > > > i'm a total linux noob and am trying to avoid compiling them > myself, > > > but if that is in fact what i need to do, anyone have a good how- > to? > > > > > > thanks, > > > dan > > > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: m("yahoogroups.com","ts-7000-digest");"> m("yahoogroups.com","ts-7000-fullfeatured");"> <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |