Thanks for the support.
It looks like it works...... -:)
Hajee
--- In Michael Schmidt <> wrote:
>
> HaJee H wrote:
> > The only thing happened when I run make ts7800_defconfig is that it
> > finish with
> > '# configuration written to .config'. No kernel is compiled.
>
> That's the only command you need of the first four you listed... after
> you have the kernel configured the way you want, then of course you
have
> to run "make" to actually build the kernel.
>
> > When I use the method below, something is compiled. But where can
I find
> > the image to DD.
> > Is that in /arch/arm/boot ?
>
> Typically it will be the last file mentioned in the build process as
> that is the final product... I usually just copy and paste from the
> output of the build process into the appropriate spot in the dd command
> and then forget what it said... :-)
>
>
> > HaJee
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|