HaJee H wrote:
> The only thing happened when I run make ts7800_defconfig is that it
> finish with
> '# configuration written to .config'. No kernel is compiled.
That's the only command you need of the first four you listed... after
you have the kernel configured the way you want, then of course you have
to run "make" to actually build the kernel.
> When I use the method below, something is compiled. But where can I find
> the image to DD.
> Is that in /arch/arm/boot ?
Typically it will be the last file mentioned in the build process as
that is the final product... I usually just copy and paste from the
output of the build process into the appropriate spot in the dd command
and then forget what it said... :-)
> HaJee
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|