[ts-7000] Can jp6 of TS7200 be used as R/W ? Can I use jp5 for reading a externel bit data

["u2001149" <>]

In the spaecification sheet of TS7200, the address of jp6 is given as 
0x2280 0000.

I can read from it using the usual mmap(...) but when I try to write to 
it as *dat=0 or 1 ... nothing the signals on the pin remain same.

The other jumpers jp2-jp5 are mentioned as RO (Read Only) while nothing 
is mentioned about jp6 (user jumper).

Regards


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/