Re: [ts-7000] Boot new kernel on TS-7800

[Michael Schmidt <>]

HaJee H wrote:
> Hi,
> 
 >  > The installation of the new kernel is not a problem,
> I installed the kernel with dpkg -i linux-image-custom.deb.
> The kernel is compiled with:
> make-kpkg clean
> make-kpkg kernel-images (also with --initrd)

The TS-BOOTROM bootloader doesn't use the Debian partition to load the 
kernel.

To install the kernel you'll need to dd the kernel image to the kernel 
partition (partition 2 on the SD card or partition 1 on the on-board 
flash).


> HaJee

  ______   Best Regards,
|__  __/                  Michael Schmidt
    ||                   Software Engineer
    ||echnologic Systems (EmbeddedARM.com)
    || (480)    16610 East Laser Drive #10
    |/ 837-5200   Fountain Hills, AZ 85268
        http://oz.embeddedarm.com/~michael

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/