[ts-7000] Aero board present see, by linux,but not by aeroee.c

["trucmuch_59" <>]

Hello,
I try to make my aero board working, but it's look like it's not.
here is the messages I got on the dmesg:
TS-UART/RF2 found at port 0x0100
ttyTS1 at I/O 0x89e00102 (irq = 40) is a TSUART


But when I ty the aeroee.c from TechSystem it doesn't see my board.
Does I have to load a program to be able to use it or not ?
The aero module (a 2.4Ghz module) Is working i was able to put it on a
PC in it's default config (115200bps), but not on my pc104 board.

any clue what to do or look for ?

thanks in advance,

arno




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/