Hello,
I am trying to choose a platform for a metering application that requires
* 8 inputs with IRQ capability (used for pulse counting)
* 8 Outputs
* 2-4 A/D Inputs
I have just acquired a TS7800, however, it seems like the board does
not support GPIO based interrupts. I went with the TS7800 because of
the official 2.6 Kernel support.
It seems however that the other TS series namely the TS7260 seem to
provide a better hardware match (correct me if I am wrong, especially
with the IRQ capability on inputs). I am however concerned with the
use of the 2.4 kernel which is getting old...
For those who have been using the 2.6 kernel on TS72xx boards,
Is the code production ready?
Are there any non supported devices?
Moussa
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|