Re: [ts-7000] Re: Power problems or other on 7260 + 9600

["Sean Hopkins" <>]

On 6/6/07, Jim Jackson <> wrote:

 

You'll need ammeters :-)

 

Should have been clearer... a techtronics multimeter ;-)

 

As people have hinted, there is the problem that when you start an a
device with an electric motor, there is a large initial, transient,
current that is needed to get the motor started and upto speed. After that
the current drops to that quoted by the manufacturers. It is this shart up
current that is probably causing your problem. You will need a psu that
can provide the boards current, and this large initial motor current.

 

Yes, it does seem that pure plug and play is not going to happen right away... at least for a HDD.  I will be sourcing a better PSU (with someone that knows ammeters from voltimeters).

 

Sean

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___