Re: [ts-7000] Power problems or other on 7260 + 9600

[Jason Stahls <>]

I'm not objecting to the HDD, I'm saying that I dont' think the stock TS power supply can supply the current required to run a TS board and a HDD.  The HDD is 500mA and I bet the PS can't supply much more then that.

Jason

Sean Hopkins wrote:

Thanks.  Here are the specs on the HDD from the manufacturer's website:

Current Requirements
5 VDC
Read/Write  500 mA
Idle  400 mA
Standby  45 mA
Sleep  38 mA

Power Dissipation
Read/Write  2.50 Watts
Idle  2.00 Watts
Standby  0.23 Watts
Sleep  0.19 Watts

Since I do not (yet) have a spare PS lying around, does that sound like a reasonable HDD ?  What other HDD's have people successfully hooked up to the EA 9600 and any 7xx0 board ?


Thanks.

Sean

On 6/5/07, Jason Stahls <> wrote:
      
>
>     I honestly wonder if the board is capable of passing enough power to the HDD to run.  I'd connect a larger PS to the board, if you have a 5 or 10 amp variable bench supply handy that would work.
>  
>  Jason

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___