Re: [ts-7000] Re: Power problems or other on 7260 + 9600

["Sean Hopkins" <>]

On 6/5/07, Gonzalo A. de la Vega <> wrote:

The switcher in the TSENC720 enclosure (I guess that's what you are
using) sources up to 1A => 5W, which is enough in theory, but
according to the 9600 manual, some disks may take up to 1A peak and
then you are in trouble. Check that in the manual. In case the peak
current is 1A it may be a very short pulse (like when spinning up the
disk), so a bigger capacitor could help, say 440 or 1000uF (the PS
comes with 66uF).

Thanks for the hints.  I will see if I can hook anything up to see how much current is being drawn.  I have some sensitive voltimeters that I can use.

I'm also supposing you are bypassing the TS7260 built in PS.

 

I am using the device as supplied by EA - board was mounted in the enclosure and everything was all hooked up.

 

Thanks

 

Sean

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___