ts-7000
[Top] [All Lists]

Re: [ts-7000] Power problems or other on 7260 + 9600

To:
Subject: Re: [ts-7000] Power problems or other on 7260 + 9600
From: "Sean Hopkins" <>
Date: Tue, 5 Jun 2007 18:06:08 -0500
Thanks.  Here are the specs on the HDD from the manufacturer's website:

Current Requirements
5 VDC
Read/Write  500 mA
Idle  400 mA
Standby  45 mA
Sleep  38 mA

Power Dissipation
Read/Write  2.50 Watts
Idle  2.00 Watts
Standby  0.23 Watts
Sleep  0.19 Watts

Since I do not (yet) have a spare PS lying around, does that sound like a reasonable HDD ?  What other HDD's have people successfully hooked up to the EA 9600 and any 7xx0 board ?


Thanks.

Sean

On 6/5/07, Jason Stahls <> wrote:
      
>
>     I honestly wonder if the board is capable of passing enough power to the HDD to run.  I'd connect a larger PS to the board, if you have a 5 or 10 amp variable bench supply handy that would work.
>  
>  Jason __._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU