[ts-7000] Re: Error loading kernel from CF flash (almost there?)

["djtopper" <>]

--- In  David Hawkins <> wrote:

> Which procedure did you end up using for modutils build? Linux?

I used the same technique you suggested.  I downloaded modutils, built
it for arm, then pointed my kernel build to use it.

Yeah, I checked some of the RedBoot commands.  After reading the
RedBoot manual, I see the following command:

RedBoot> disks
hda1     Unknown

That is my CF card because when I boot up w/o the card the "disks"
command shows nothing.  So, I'm even more perplexed as to why my load
command doesn't work.  ;-(

DT



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/