--- In David Hawkins <> wrote:
>
> Hi,
>
> > I've compiled the 2.4 (ts11) kernel from TS. I've also compiled the
> > modules properly using modutils to build for the arm platform.
>
> Which procedure did you end up using for modutils build? Linux?
>
> > I've
> > copied the Debian 3.1 (Sarge) distro to my CF flash card, along with a
> > kernel image (both vmlinux and compressed zImage -> vmlinuz). I've
> > also copied the compiled modules to the CF card filesystem.
> >
> > But when I try to load it from the CF card using the following
> > commands (copied from a previous thread which suggests it should work)
> > I get an error:
> >
> > load -r -b 0x00218000 -m disk hda1:/vmlinux
> >
> > Can't load 'hda1:/vmlinux': Unsupported filesystem
> >
> > I formatted the card using mk2efs.
> >
> > Close, but still no cigar. ;-(
Dumb questions: did you
a) use fdisk to create hda1?
b) put vmlinuz on hda1?
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|