Hi,
> I've compiled the 2.4 (ts11) kernel from TS. I've also compiled the
> modules properly using modutils to build for the arm platform.
Which procedure did you end up using for modutils build? Linux?
> I've
> copied the Debian 3.1 (Sarge) distro to my CF flash card, along with a
> kernel image (both vmlinux and compressed zImage -> vmlinuz). I've
> also copied the compiled modules to the CF card filesystem.
>
> But when I try to load it from the CF card using the following
> commands (copied from a previous thread which suggests it should work)
> I get an error:
>
> load -r -b 0x00218000 -m disk hda1:/vmlinux
>
> Can't load 'hda1:/vmlinux': Unsupported filesystem
>
> I formatted the card using mk2efs.
>
> Close, but still no cigar. ;-(
I can't help, as I don't have a similar system.
First thing I'd try is to see if redboot has commands for
listing hda1 files to see if redboot can see the files. If
it does have commands, and you can list the files, then
I'd suspect the load syntax.
Dave
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|