| To: | |
|---|---|
| Subject: | [ts-7000] COM2 Pinouts |
| From: | "weide72" <> |
| Date: | Mon, 21 Aug 2006 20:22:15 -0000 |
Hi-
Just wondering what the correct connection would be to connect a DB-9
Male connector to the COM2 port on the TS-7260? Jim Jackson's link on
this group's links page differs from the TS-7260 manual. All I need
to connect is TX, RX, and GND. Thanks.
Ryan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G, torsten_lund |
|---|---|
| Next by Date: | [ts-7000] Terminal Emulator, Randall Philipson |
| Previous by Thread: | [ts-7000] Working with /dev/rtc, Mike Magee |
| Next by Thread: | Re: [ts-7000] COM2 Pinouts, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU