| To: | |
|---|---|
| Subject: | [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G |
| From: | "torsten_lund" <> |
| Date: | Tue, 22 Aug 2006 17:36:35 -0000 |
> > It looks like you don't have the sd_mod module loaded, see message 2036. > > //Eddie > Hello Eddie Thank you for the reply. I tried loading the module sd_mod, but it doesn't seem to change any thing. I noticed that when I plug in the adapter without having loaded zd.o the driver automatically gets loaded. (but still doesn't work) new USB device not_pci-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x7b8/0x6001) is not claimed by any active drive. zd1211 - http://zd1211.ath.cx/ Based on www.zydas.com.tw driver version 2.0.0.0 usb.c: registered new driver zd1211 Release Ver = 4330 EEPORM Ver = 4330 usb_control/bulk_msg: timeout usb_set_configuration() failed Kind regards, Torsten Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Working with /dev/rtc, Mike Magee |
|---|---|
| Next by Date: | [ts-7000] COM2 Pinouts, weide72 |
| Previous by Thread: | [ts-7000] SPI Interface, David L. Martin |
| Next by Thread: | Re: [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G, Eddie Dawydiuk |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU