Re: [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G

["Eddie Dawydiuk" <>]

Hello,

> Thank you for the reply. I tried loading the module sd_mod, but it
> doesn't seem to change any thing.
> I noticed that when I plug in the adapter without having loaded zd.o
> the driver automatically gets loaded. (but still doesn't work)
>
> new USB device not_pci-1, assigned address 2
> usb.c: USB device 2 (vend/prod 0x7b8/0x6001) is not claimed by any
> active drive.
> zd1211 - http://zd1211.ath.cx/
> Based on www.zydas.com.tw driver version 2.0.0.0
> usb.c: registered new driver zd1211
> Release Ver = 4330
> EEPORM Ver = 4330
> usb_control/bulk_msg: timeout
> usb_set_configuration() failed

What kernel version are you using? Are you using the default kernel shipped
on the board, or did you compile your own kernel?

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/