| To: | |
|---|---|
| Subject: | Re: [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G |
| From: | "Eddie Dawydiuk" <> |
| Date: | Thu, 24 Aug 2006 14:07:11 -0700 (MST) |
Hello,
> I am using the initial ramdisk and the kernel 2.4.26-ts10 obtained
> from 7260_initrd_files.tar.bz2 in the files section in order to be
> able to boot into the Debian SD card.
It sounds like everything you are doing is correct, do you have a
USB flash drive to test if the USB port is working properly? Have
you tried using both USB ports?
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: industrial touch screen panel for the ts-7300, Yan Seiner |
|---|---|
| Next by Date: | Re: [ts-7000] Working with /dev/rtc, Mike Magee |
| Previous by Thread: | [ts-7000] Re: Problems with TS7260 and PRISMQ WUA-11G, torsten_lund |
| Next by Thread: | [ts-7000] TS 7260 & C#, stageelectronique |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU