Hello,
--- In "Eddie Dawydiuk" <> wrote:
>
> Hello,
>
> > Thank you for the reply. I tried loading the module sd_mod, but it
> > doesn't seem to change any thing.
> > I noticed that when I plug in the adapter without having loaded zd.o
> > the driver automatically gets loaded. (but still doesn't work)
> >
> > new USB device not_pci-1, assigned address 2
> > usb.c: USB device 2 (vend/prod 0x7b8/0x6001) is not claimed by any
> > active drive.
> > zd1211 - http://zd1211.ath.cx/
> > Based on www.zydas.com.tw driver version 2.0.0.0
> > usb.c: registered new driver zd1211
> > Release Ver = 4330
> > EEPORM Ver = 4330
> > usb_control/bulk_msg: timeout
> > usb_set_configuration() failed
>
> What kernel version are you using? Are you using the default kernel
shipped
> on the board, or did you compile your own kernel?
>
> //Eddie
>
I am using the initial ramdisk and the kernel 2.4.26-ts10 obtained
from 7260_initrd_files.tar.bz2 in the files section in order to be
able to boot into the Debian SD card.
/Torsten
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|