Hello
I have tried to make a PRISMQ WUA-11G WiFi adapter work with a TS-7260
board.
I am booting into an SD-card with a Debian distro and the 2.4.26-ts10
kernel obtained from 7260_initrd_files.tar.bz2 in the files section.
I tried following the example from
http://groups.yahoo.com/group/ts-7000/message/2036
I have tried both the precompiled driver from the tool CD
tsarmcd/binaries/ts-modules/lib/modules/2.4.26-ts10/kernel/drivers/net/wireless/zd.o
and the newest version (r83) from http://zd1211.ath.cx/
In both cases I get the following errors, when I plug the device
usb_control/bulk_msg: timeout
usb_set_configuration() failed
usb.c: USB device 2 (vend/prod 0x7b8/0x6001) is not claimed by any
active driver.
(for details - see below)
Does anyone have an idea what the problem is and how to solve it.
Kind Regards
Torsten Lund
Denmark
:~# modprobe -v zd
/sbin/insmod /lib/modules/2.4.26-ts10/kernel/drivers/net/wireless/zd.o
Using /lib/modules/2.4.26-ts10/kernel/drivers/net/wireless/zd.o
Symbol version prefix ''
zd1211 - http://zd1211.ath.cx/ - r83
Based on www.zydas.com.tw driver version 2.5.0.0
usb.c: registered new driver zd1211
:~# lsmod
Module Size Used by Not tainted
zd 264672 0 (unused)
usb-ohci-ep93xx 892 0 (unused)
usb-ohci 15580 0 [usb-ohci-ep93xx]
af_packet 9456 0 (unused)
scsi_mod 53820 0 (unused)
pcipool 2080 1 [usb-ohci-ep93xx usb-ohci]
usbcore 55944 1 [zd usb-ohci]
sdcard0 9776 1
:~# hub.c: new USB device not_pci-3, assigned address 2
Release Ver = 4330
EEPORM Ver = 4330
usb_control/bulk_msg: timeout
usb_set_configuration() failed
usb.c: USB device 2 (vend/prod 0x7b8/0x6001) is not claimed by any
active driver.
:~# ifconfig wlan0 up
wlan0: ERROR while getting interface flags: No such device
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|