ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ts-7000] COM2 Pinouts

from [Dawid] [Permanent Link][Original]
To: <>
Subject: Re: [ts-7000] COM2 Pinouts
From: "Dawid" <>
Date: Wed, 23 Aug 2006 08:42:58 +0200
Hi,
 
I had the same problem.
 
Look at the schematics
page 3.
 
David

Hi-

Just wondering what the correct connection would be to connect a DB-9
Male connector to the COM2 port on the TS-7260? Jim Jackson's link on
this group's links page differs from the TS-7260 manual. All I need
to connect is TX, RX, and GND. Thanks.

Ryan

__._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os Single board

YAHOO! GROUPS LINKS

  •  Visit your group "ts-7000" on the web.
     
  •  To unsubscribe from this group, send an email to:
     =Unsubscribe
     
  •  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [ts-7000] Terminal Emulator, Dino Sbrocca
Next by Date:  [ts-7000] rs232 vs rs485, Art
Previous by Thread:  Re: [ts-7000] Re: COM2 Pinouts, John-Mark Gurney
Next by Thread:  [ts-7000] Re: COM2 Pinouts, asc135
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU