On Wed, 23 Mar 2005, dawydiuk wrote:
> > p.s. if anyone from Technologics is reading this - why don't you
> get the
> > schematic, and user guide corrected then people wouldn't get
> confused?
>
> The information in the manual is correct, if you read just below the
> pinout for the Com2 header you will notice a large arrow with the
> following comment
>
> "Note: The COM2 serial port header uses a non-standard numbering
> scheme. This was done so the header pins would have the same numbering
> as the corresponding DB-9 pin; i.e. pin 3 (TXD) on the header connects
> to pin 3 on the DB-9."
>
I had an early ts7200 maybe you have updated the manual then, but if this
is the update, then it is causing confusion. Good manuals do not cause
confusion.
There is a numbering standard for the sort of header pins you use - simply
saying you renumber them is frankly stupid.
Simply give the standard pin numbering and the pin function!
> The COM ports use this style numbering:
>
> 6 7 8 9 10
> 1 2 3 4 5
>
> I'll ensure this numbering scheme is added to the manual to avoid
> confusion.
>
> //Eddie
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|