[ts-7000] Re: Usbserial can't open tty line

["dawydiuk" <>]

> p.s. if anyone from Technologics is reading this - why don't you
get the
> schematic, and user guide corrected then people wouldn't get
confused?

The information in the manual is correct, if you read just below the
pinout for the Com2 header you will notice a large arrow with the
following comment

"Note: The COM2 serial port header uses a non-standard numbering
scheme. This was done so the header pins would have the same numbering
as the corresponding DB-9 pin; i.e. pin 3 (TXD) on the header connects
to pin 3 on the DB-9."

The COM ports use this style numbering:

6 7 8 9 10
1 2 3 4 5

I'll ensure this numbering scheme is added to the manual to avoid
confusion.

//Eddie





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/