No, the com port is only 3-wire (Rx, Tx, Gnd), there's no modem control
signals to worry about.
chuck
< To:
t-co.com> cc:
Subject: Re: [ts-7000] Re:
Usbserial can't open tty line
23/03/2005 02:32
p.m.
Please respond to
ts-7000
> Connecting up COM2 - the second RS232 port
>
> COM2 Header DB9 DB25
>
> Pin 3 RS232 RXD pin 2 pin 3
> Pin 5 RS232 TXD pin 3 pin 2
> Pin 9 ground pin 5 pin 7
>
>
Don't I also have to jumper 1,4,6 and 5,8 or some such setup.
And it's /dev/ttyAM1 ?
Yahoo! Groups Links
###########################################################################
This e-mail is confidential and may contain information subject to legal
privilege. If you are not the intended recipient please advise us of our
error by return e-mail then delete this e-mail and any attached files.
You may not copy, disclose or use the contents in any way.
The views expressed in this e-mail may not be those of Gallagher Group
Ltd or subsidiary companies thereof.
###########################################################################
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|