| To: | |
|---|---|
| Subject: | Re: [ts-7000] Re: Usbserial can't open tty line |
| From: | chuck <> |
| Date: | Tue, 22 Mar 2005 19:32:06 -0700 |
> Connecting up COM2 - the second RS232 port
>
> COM2 Header DB9 DB25
>
> Pin 3 RS232 RXD pin 2 pin 3
> Pin 5 RS232 TXD pin 3 pin 2
> Pin 9 ground pin 5 pin 7
>
>
Don't I also have to jumper 1,4,6 and 5,8 or some such setup.
And it's /dev/ttyAM1 ?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Watchdog: PLD vs EP9302, andygryc |
|---|---|
| Next by Date: | Re: [ts-7000] Re: Usbserial can't open tty line, Andrew Bealing |
| Previous by Thread: | [ts-7000] Re: Usbserial can't open tty line, vocemanago |
| Next by Thread: | Re: [ts-7000] Re: Usbserial can't open tty line, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU