On Mon, 6 Nov 2006, Peter Baitz wrote:
> Alan,
>
> I just did the make procedure per instructions.
> Building it results in a 650KB pwc.ko module. The
> stock pwc.ko in FC6 is 95KB. Seems like a big
> difference. I need it for a ToUcam Pro III (SDV
> 900NC) which needs to be supported as typedef 740.
Building it optimised won't make it any more compatible, but try -O6
Most of the extra bulk is very likely to be debugging symbols....
>
> Peter
>
> --- Alan Brown <> wrote:
>
> > On Sun, 5 Nov 2006, Peter Baitz wrote:
> >
> > > Actually you can also do "modinfo pwc" and it
> > tells
> > > the developer and version (Saillard.org and
> > 10.0.12),
> > > but what I still do not understand is that when I
> > > compile pwc as I previously did, the pwc.ko is
> > over
> > > 600kb while the stock pwc.ko even in FC6 is only
> > 95kb
> > > or so. Seems like a huge diff.
> >
> > Did you strip or otherwise optimise your module?
> >
> >
>
>
>
>
> ____________________________________________________________________________________
> Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates
> (http://voice.yahoo.com)
>
--
If a person, or organisation, starts to play on your fears
it may be that person or organisation that you should fear.
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|