pwc
[Top] [All Lists]

Re: [pwc] Any update on 2.6.18?

To:
Subject: Re: [pwc] Any update on 2.6.18?
From: "Cassius V. de Magalhaes" <>
Date: Mon, 06 Nov 2006 11:31:39 -0200
Luca Capello escreveu:
Hello!

On Sun, 05 Nov 2006 20:16:30 +0100, Cassius V. de Magalhaes wrote:
I did do follow your suggestions and below is the output:
[...]
pwc: Philips webcam module version 10.0.12 loaded.

The module is correctly loaded.

pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as /dev/video0.
usbcore: registered new driver Philips webcam
usbcore: registered new driver snd-usb-audio"

Your webcam is correctly detected and the two drivers are loaded: pwc
(obviously) and snd-usb-audio because I bet that your webcam has a
microphone on it.

You should be able to use your webcam pointing the application to
/dev/video0 (if it's not automatically recognized and displayed).

Thx, bye,
Gismo / Luca

Hello,

One more thing, how to make the modprobe pwc permanent, because when I reboot the system and the webcam is plugged, it is not recognized and the sound system doesn't works. I have to unplug it, reboot again, so the sound system is normal and I able to modprobe pwc successfully.


TIA,
Vinicius.
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU