pwc
[Top] [All Lists]

Re: [pwc] Any update on 2.6.18?

To:
Subject: Re: [pwc] Any update on 2.6.18?
From: Raymond <>
Date: Mon, 06 Nov 2006 07:47:13 -0500
At 03:57 AM 6/11/2006 -0800, Peter Baitz wrote:
Alan,

I just did the make procedure per instructions.
Building it results in a 650KB pwc.ko module.  The
stock pwc.ko in FC6 is 95KB.  Seems like a big
difference.  I need it for a ToUcam Pro III (SDV
900NC) which needs to be supported as typedef 740.

Peter

--- Alan Brown <> wrote:

> On Sun, 5 Nov 2006, Peter Baitz wrote:
>
> > Actually you can also do "modinfo pwc" and it
> tells
> > the developer and version (Saillard.org and
> 10.0.12),
> > but what I still do not understand is that when I
> > compile pwc as I previously did, the pwc.ko is
> over
> > 600kb while the stock pwc.ko even in FC6 is only
> 95kb
> > or so. Seems like a huge diff.
>
> Did you strip or otherwise optimise your module?
>
>




____________________________________________________________________________________
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates
(http://voice.yahoo.com)

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU