Subject: | Re: 7mm phone jack |
---|---|
From: | "Flawn Williams" flawn1951 |
Date: | Tue Apr 7, 2009 4:06 am ((PDT)) |
> The use of the terms plug and jack as described in recent messages is different than my experience. In my lexicon, shared with many audio professionals over the years, "plug" is any connector (male or female) attached to one end of a cable. "Jack" is any connector (male or female) built into the chassis of a piece of equipment. > > <<On other terminology, in my part of the world, Plug usually means > the male > connector and Jack is the female.>> > > This is correct usage in the USA. Jack with a capital J seems to be > the most widespread term in non-Imperial countries for 1/4" > connectors of either gender. Since my tech riders go to sound system > providers overseas as well as within North America I've taken to > using both together. > > Scott Fraser > |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: 7mm phone jack, Scott Fraser |
---|---|
Next by Date: | Re: 7mm phone jack, obSession |
Previous by Thread: | Re: 7mm phone jack, Scott Fraser |
Next by Thread: | Re: 7mm phone jack, obSession |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU