| Subject: | Re: dynamic microphones |
|---|---|
| From: | "Curt Olson" flipov411 |
| Date: | Fri Mar 9, 2007 6:49 am ((PST)) |
Dan: >>> dBV/Pa Open Circuit mV >>> -60 1.0 >>> -50 3.2 (hot dynamic mic) >>> -40 10.0 (condensor mic) >>> 0 1000.0 (1 Volt) Rob: >> The rule of thumb I've come across in a few places is 10mV/Pa being a >> reference minimum in sensitivity for condenser mics if one is after >> lower noise performance. Does this correspond with your -40 dBV/Pa, >> Dan? Dan again: > Exactly. > > -Dan Dugan Thank you, gents! Curt Olson |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: dynamic microphones, Dan Dugan |
|---|---|
| Next by Date: | Re: dynamic microphones, Rob Danielson |
| Previous by Thread: | Re: dynamic microphones, Dan Dugan |
| Next by Thread: | Re: dynamic microphones, Rob Danielson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU