Phil,
Now rereading your original post, I see I overlooked you mentioning
measuring 3.5 V on your power adapter. So I went back and remeasured
mine. The one I originally measured at 5.1V (model AC-ES305)I think
came with my older MZ-N707 MD (not a HiMD). The one that came with the
HiMD RH10 (AC-ES3010K2) measures 3.4V, and the one that was supplied
supplemental to the MZ-NH700 (AC-E30A) measured 3.3V.
I was making my assumptions about HiMD powering based on an older
power supply, and I appologize for steering anyone wrong.
John Hartog
--- In "macmang4125"
<> wrote:
>
> Looking at Rob Danielson's excellent site I saw John Hartog's 4.8 volt
> sled. Before I go and plug 4.8 volts into my NH900 I would like
> reassurance that this is OK. As measuring the volts out of the power
> supply they are 3.5 volts, the extra 1.3 volts should not be a
> problem. But I would hate for them to be my 'famous last words' :-))
>
> Phil
>
|