Re: Powering Sony MZ-NH900 with 4.8 volts

["John Hartog" hartogj]

Rich, I like it.
I also like the little box you use - where could I find something like
that?

John hartog


> Since a variable voltage regulator is so easy to builld if one wants
> to make sure to keep voltages in line then consider building a small
> box around the LM317. Linked is a small regulator I built and the trim
> pot for changing the output voltage is screwed under the cover.
> Circuit diagram is on the card at radio shack where you can buy the
part.
> http://home.comcast.net/~richpeet/LM317T.JPG
> I would show the inside but I just wired it "dead bug" then filled the
> inside of the box with epoxy. This makes it easy, waterproof, and
> shockproof.
>
> Rich Peet
>