Re: Noiselevel on Sony MZ-RH1

["Dan Dugan" dandugan_1999]

Sveinung, you wrote,

>I have uploaded two files called line_input_RH1.wav and
>mic_input_RH1.wav. They were recorded using a cable into the mic
>preamp input that did not lead anywhere,

and stoatwizard wrote,

>If the comparison is between the noise level of the systems at full
>gain but without the mic connected

Stop! Mic preamps are always more noisy with nothing connected (no
input termination is the technical term), and evaluations that way
are meaningless. Either listen with a mic connected or with a dummy
input (150 Ohm resistor for balanced mics, 2000 Ohms for electret
capsule).

-Dan Dugan