Subject: | Re: Caution! Tech Talk |
---|---|
From: | Marc Myers <> |
Date: | Sat, 21 Jan 2006 18:57:34 -0800 |
Hi Mark First be sure that your recorder and preamp really allow you to record at those rates. In practice, very few devices have SN high enough to warrent recording at 24/96. If you process the sound, it's perfectly acceptable to "up-rez" to 24/96 or higher. This doesn't improve things but allows dither if you are shaping the sound. There's no substitute for a fast microprocessor with as much RAM as possible, a RAID array (SATA is fine) for your media hard drive and a sound card that supports ASIO2 for low latency response. Marc Myers Primate Conservation, Inc. ________________________________________________________________________ ________________________________________________________________________ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Caution! Tech Talk, Marc Myers |
---|---|
Next by Date: | Re: Bottoming-out revisited, Rob Danielson |
Previous by Thread: | Re: Caution! Tech Talk, Marc Myers |
Next by Thread: | Adobe Audition 2.0, Martyn Stewart |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU