I have a Tascam and when using a MKH20 (or similar), - what I then hear is=
mic noise, not Tascam noise. For noise reasons, there is no point in
getting an extra preamp.
Klas.
At 09:59 2005-04-20, you wrote:
>hello list
>i had a question about using condensor microphones and pre-amplifiers.
>would the pre-amps on a tacam da-p1 dat deck be sufficient or should one
>rather go with an external pre-amp, such as the sound devices mix pre
>http://www.sounddevices.com/products/mx2master.htm
>i want to record with two oktava mc-012 condensor microphones.
>i currently use a sony tcd-d8 dat. the size is great, but it has no
>phantom power. i want to upgrade; the question is whether to buy a
>pre-amp or to buy another dat which has phantom power (such as the
>tascam da-p1).
>thanks very much for any help.
>best regards
>jason kahn
>
>
>
>"Microphones are not ears,
>Loudspeakers are not birds,
>A listening room is not nature."
>Klas Strandberg
>Yahoo! Groups Links
>
>
>
>
Telinga Microphones, Botarbo,
S-748 96 Tobo, Sweden.
Phone & fax int + 295 310 01
email:
________________________________________________________________________
________________________________________________________________________
"Microphones are not ears,
Loudspeakers are not birds,
A listening room is not nature."
Klas Strandberg
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/naturerecordists/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
|