wrote:
> In a message dated 10/15/02 8:08:58 PM Pacific Daylight Time,
> writes:
>
>
>
>>I have found I can do better by using a -15 dB attenuating cable
>>connection between, and setting the HHb on Mic with -15 dB of internal
>>attenuation. That combo gives about the best sound I've found so far. I
>>think a lot of that is that it's set up so neither pre is working all
>>that hard, sitting closer to their sweet spot. The combo also allows a
>>bit more gain than the Portadisc alone with the MKH.
>>
>
>
> Would the MP2 (useing the HHB portadisc)work with the Senn ME67-6 and its=
> accompanying power module?
I've found very little the portadisc by itself can't work with. Marty is
using a pair of ME 67's with his. If it will work without the MP2 added,
It will work with the MP2. The only question would be why? You might be
able to get a slight bit better gain for a little more reach, but not
much else.
Walt
________________________________________________________________________
________________________________________________________________________
|