Re: [ts-7000] Re: TS-7260 USB Hard Drive Issue

[Melvin Newman <>]

Thanks guys, thats the information I am looking for!

- Melvin

On Wed, Jun 22, 2011 at 11:01 AM, Alex <> wrote:

 

I had same issue. Solved by providing separate power to the hard drive enclosure. I use Vantec Nexstar enclosure which has input for +5V DC.

--- In ts-7000%40yahoogroups.com, "zexelon2" <> wrote:
>
> I have a TS-7260 that I am trying to set up with an external USB drive (laptop drive) to store data on for my board, however I have an issue when I plug the drive into the USB the board reboots and completely hard locks (both red and green lights come on and stay solid).
>
> I have tried two separate adapters for both a SATA and IDE laptop drive (size range 80 - 150 Gigs).
>
> Interestingly enough, the board immediately continues to boot and function properly if I unplug the usb drive, I dont even have to reset it.
>
> Could this be a power issue? Do the laptop drives try to pull to much power through the USB adapters? Or is there no way to even do this?
>

> Thank you very much for your help!
>
> - Melvin
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___