I had same issue. Solved by providing separate power to the hard drive
enclosure. I use Vantec Nexstar enclosure which has input for +5V DC.
--- In "zexelon2" <> wrote:
>
> I have a TS-7260 that I am trying to set up with an external USB drive
> (laptop drive) to store data on for my board, however I have an issue when I
> plug the drive into the USB the board reboots and completely hard locks (both
> red and green lights come on and stay solid).
>
> I have tried two separate adapters for both a SATA and IDE laptop drive (size
> range 80 - 150 Gigs).
>
> Interestingly enough, the board immediately continues to boot and function
> properly if I unplug the usb drive, I dont even have to reset it.
>
> Could this be a power issue? Do the laptop drives try to pull to much power
> through the USB adapters? Or is there no way to even do this?
>
> Thank you very much for your help!
>
> - Melvin
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|