Re: [ts-7000] Re: Autostart programs.

[Howard Blue <>]

OK, these steps work work but I have to type "exit" before my program runs.

 

Is there a procedure to make my program run automatically without input from the console?

 

I would like to simply apply power to the TS-7260 board, boot up and run my program without any user input.

 

--- On Tue, 6/21/11, wawan_wiratno <> wrote:

From: wawan_wiratno <>
Subject: [ts-7000] Re: Autostart programs.
To:
Date: Tuesday, June 21, 2011, 3:05 AM

 

Hi,
try this steps:
1. script on /etc/init.d/yourscript
2. chmod 755 /etc/init.d/yourscript
3. make as default on rc with this command, update-rc.d -f yourscript defaulfts
4. reboot

try to dump something on yourscript > dumpfile
see if run after reboot.

Br,
Wawan

--- In , Howard Blue <> wrote:
>
> 1. Created a script in the init.d directory that runs my program.
>
> 2. Created a link to my script in the rc3.d directory.
>
> 3  On boot up my program does not run but I can run it manually by using the link.
>
> What am I missing?
>
> Thanks.
>
>
>
> --- On Fri, 6/3/11, Harold <> wrote:
>
> From: Harold <>
> Subject: [ts-7000] Re: Autostart programs.
> To:
> Date: Friday, June 3, 2011, 5:44 PM
>
>
>
>
>
>
>
>  
>
>
>
>
>
>
>
>
>
> To get specific:
>
>
>
> 1. Create a start-up script in /etc/init.d
>
> The script can be as simple as one line that runs your program.
>
> $ cat >/etc/init.d/myscript
>
> /mypath/myprog &
>
> <Ctrl+D>
>
>
>
> 2. Give the script execute permission.
>
> $ chmod +x /etc/init.d/myscript
>
>
>
> 3. Create a symbolic link to the script in the rc3.d directory.
>
> $ ln -s ../../init.d/myscript /etc/rc.d/rc3.d/S99myscript
>
>
>
> --- In , Jim Jackson <jj@> wrote:
>
> >
>
> >
>
> >
>
> >
>
> > On Thu, 2 Jun 2011, ramandeep wrote:
>
> >
>
> > > craate a start-up script and place it at /etc/init.d
>
> > >
>
> > > then issue
>
> > >
>
> > > update-rc.d script-name defaults
>
> >
>
> > This won't work for the minimal TSlinux image. You would have to
>
> > make the links your self.
>
> >
>
> > Similarly, /etc/rc.local doesn't exist on the on board TS image.
>
> >
>
> > >
>
> > > from command prompt.This would place links at all run levels.
>
> > >
>
> > > Thanks,
>
> > > Ramandeep
>
> > >
>
> > > --- In , Howard Blue <hblue94@> wrote:
>
> > > >
>
> > > > I want my program to start after the TS-7260 board boots up and before the log in prompt.
>
> > > >
>
> > > > --- On Wed, 6/1/11, Clark Dunson <cdunson@> wrote:
>
> > > >
>
> > > >
>
> > > > From: Clark Dunson <cdunson@>
>
> > > > Subject: Re: [ts-7000] Autostart programs.
>
> > > > To:
>
> > > > Date: Wednesday, June 1, 2011, 12:27 AM
>
> > > >
>
> > > >
>
> > > > ? 
>
> > > >
>
> > > >
>
> > > >
>
> > > >
>
> > > > Do you mean at boot time? ? 
>
> > > > Simplest:? 
>
> > > > Put the prg in the /etc/rc.local file; or? 
>
> > > > use the /etc/init.d/ mechanism.
>
> > > >
>
> > > >
>
> > > > On May 31, 2011, at 12:13 PM, hblue94 wrote:
>
> > > >
>
> > > > ? 
>
> > > >
>
> > > > How do you make user program autostart on the TS-7260 board?
>
> > > >
>
> > > > Thanks for the help.
>
> > > >
>
> > >
>
> > >
>
> > >
>
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___