You can find the instructions on our FTP site:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/binaries/ts-images/README
The /dev nodes are automatically updated on boot when the linuxrc script runs
"mdev -s" you do not need to manually mknod them.
-Kris Bahnsen
Technologic Systems
--- In "Mike Jubes" <> wrote:
>
>
>
> --- In "Kris" <kristechnologic@> wrote:
> >
> > It is the same procedure as a full size SD card. However, you must
> > remember that the microSD card shows up to the system as /dev/tssdcarda
> > while the full size is /dev/tssdcardb. The linuxrc scripts expect
> > tssdcardb devices, so you will need to make modifications in order to fully
> > boot from the microSD card.
> >
> > -Kris Bahnsen
> > Technologic Systems
> >
>
> Thanks for that.
>
> Could you please post the correct command to format a micro_SD card (just so
> that I get it right please!)
>
> Also my /dev directory doesn't seem to have a "tssdcardb" file, only a
> "tssdcarda" and "tssdcarda1", where can I get the "tssdcardb" one from, so
> that I can also use a normal SD card?
>
> thanks in advance
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|