On Fri, 17 Dec 2010, tommessum wrote:
> Also note the mount command on the TS7800 is: "mount /dev/tssdcarda1
> /mnt/mydir" For some reason it has to be "tssdcarda1" not "tssdcarda"
> even though both files appear on the /dev directory, again don't know
> why!
/dev/tssdcarda is the device,
/dev/tssdcarda1 is the first partition. It there were more partitions
there's be /dev/tssdcarda2, /dev/tssdcarda3 etc. You'd mount the correct
partition where you wanted it - just like a hardrive.
> Also, as far as I know, the SD card must be in the drive when the TS7800
> is booted up, I could never get the board to recognise a SD card placed
> in the socket after it has been booted up (Again, anybody know why?)
If it's anything like the SD card in the ts7260, then TS emphatically warn
you about that in their documentation. This isn't a USB connected
interface, like you'd use for connecting SD to a desktop PC.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|