[ts-7000] Re: ts-7800/ts-7300 and the FPGA

["" <>]

--- In  "zuikway" <> wrote:
>
> Simply because the 7800 runs 2.6 out of the box, I would recommend it. The 
> main advantage of the ts-7300 is the second ethernet port, but it is an older 
> board and only 2.4 is supported.
> 
> WayneS

Right, but if I can't get the FPGA to work with my own verilog designs, the 
7800 isn't much use to me. I can't see a 500MHz ARM chip being able to sustain 
video-rate JPEG compression without some extra grunt from the FPGA...

Cheers,
    Simon



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/